Panasonic PT-MZ570, Operating Instructions Manual

Page: 139 / 229

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 139
8) Press
qw
to switch the item.
[ENABLE] Enables button operations.
[DISABLE] Disables button operations.
f
The following items can be selected only when [RGB1/2 BUTTON] is selected in [INPUT SELECT
BUTTON].
[TOGGLE] Switches between [RGB1] and [RGB2] when the button is operated.
[RGB1] Fixes to [RGB1].
[RGB2] Fixes to [RGB2].
[DISABLE]
Disables button operations.
f
The following items can be selected only when [NETWORK/USB BUTTON] is selected in [INPUT SELECT
BUTTON].
[TOGGLE]
Switches the items in following order when the button is operated.
[MEMORY VIEWER] → [Panasonic APPLICATION] → [MIRRORING]
[MEMORY VIEWER] Fixes to [MEMORY VIEWER].
[Panasonic APPLICATION] Fixes to [Panasonic APPLICATION].
[MIRRORING] Fixes to [MIRRORING].
[DISABLE] Disables button operations.
f
When [INPUT SELECT BUTTON] is selected in Step 7) , pressing the <MENU> button returns to the
[CONTROL PANEL] screen or the [REMOTE CONTROL] screen once the item is switched.
9) Press
as
to select [APPLY], and press the <ENTER> button.
f
The confirmation screen is displayed.
10) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
When a button operation is performed on the the control panel or remote control where [DISABLE] is set, the [CONTROL DEVICE
PASSWORD] screen is displayed.
Enter the control device password.
f
The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f
When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f
Even when you set button operations on the remote control disabled, operations of the <ID SET> and <ID ALL> buttons on the remote
control are kept enabled.
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press
as
to select [CONTROL DEVICE PASSWORD CHANGE].
2) Press the <ENTER> button.
f
The
[CONTROL DEVICE PASSWORD CHANGE]
screen is displayed.
3) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
4) Press
asqw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
Attention
f
The initial password is “AAAA” as the factory default or when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is
executed.
f
Change the password periodically that is hard to guess.