2) Press the <ENTER> button.
f
The ALL WHITE test pattern is displayed.
3) Press
qw
to switch the test pattern.
f
The test pattern will switch each time you press the button.
All white
The test pattern is displayed together with the operation guide of [PATTERN SELECT]. Select your
desired test pattern.
Color bar (Vertical)
Color bar (Horizontal)
Cross
Cross (Inversion)
Cross hatch
Note
f
If [TEST PATTERN] is assigned to the <FUNCTION> button on the remote control, the all white pattern will be displayed after pressing the
<FUNCTION> button.
[FILTER COUNTER]
This function is used to check the usage time of the air filter or set the cleaning/replacement cycle of the air filter.
Also, you can reset the air filter usage time.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
[FILTER COUNTER]
Displays the usage time of the air filter.
[TIMER]
Sets the cleaning/replacement cycle of the air filter.
[FILTER COUNTER RESET]
Resets the air filter usage time.
Setting [TIMER]
If you want to regularly clean/replace the air filter, set its cycle time. When the air filter usage time reaches the set
time, a message of “FILTER COUNTER has reached the set time” prompting you to clean/replace the air filter is
displayed on the projection screen.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Select not to display the message.
[1000H] - [20000H]
Select to display the message. You can set the cleaning/replacement cycle of the air filter.
Setting [FILTER COUNTER RESET]
Resets the usage time of the air filter.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
3) Press
as
to select [FILTER COUNTER RESET].
4) Press the <ENTER> button.
5)
When the confirmation screen is displayed, press
qw
to select [OK] and then press the <ENTER>
button.
f
The display of [FILTER COUNTER] changes to “0H”.
92 -
ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
