Assigning functions to the <FUNCTION> button
1)
Press the <MENU> button to display the menu items (main menu, sub menu, or details menu) to be
assigned.
f
Refer to “Navigating through the menu” (
x
page 61) for the operation of the menu.
2) Press and hold the <FUNCTION> button for three seconds or more.
Note
f
After the setting, the assigned menu items will be displayed as [ASSIGNED FUNCTION] in the operation guide under the menu.
f
To cancel the function assignment, use the [PROJECTOR SETUP] menu → [FUNCTION BUTTON]. (
x
page 90)
Using the status function
Display the status of the projector.
button
1) Press the <STATUS> button.
f
The
[STATUS]
screen is displayed.
PT-LMZ460
PROJECTOR SETUP
SELECT
RETURN
ASSIGNED FUNCTION:
DISABLE
NO SIGNAL
0 H
STATUS
SIGNAL
NAME
FREQUENCY
RUNTIME
LIGHT RUNTIME
PROJECTOR
CONTINUOUS LIGHTING TIME
SERIAL NUMBER
PROJECTOR
0.00kHz/ 0.00Hz
0 H
1 H
000000000
1/2
Note
f
The projector status can also be displayed using the menu operation. Refer to the [PROJECTOR SETUP] menu
→
[STATUS] (
x
page 85)
for details.
Using the HDMI-CEC function
Display the HDMI-CEC operation screen.
button
1) Press the <CEC> button.
f
The HDMI-CEC operation screen is displayed.
Note
f
Refer to [PROJECTOR SETUP] menu → [HDMI CEC] (
x
page 93) for details.
Setting the ID number on the remote control
When you use the multiple projectors together, you can operate all the projectors simultaneously or each projector
individually using a single remote control, if a unique ID number is assigned to each projector.
After setting the ID number of the projector, set the same ID number to the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID
ALL> button on the remote control. Also, you can control a projector by pressing the <ID ALL> button on
the remote control even if you do not know the projector ID.
button
button
1) Press the <ID SET> button on the remote control.
58 -
ENGLISH
Chapter 3 Basic Operations - Operating with the remote control
