f
When [QUICK STARTUP] is set to [ON], the power indicator <ON (G)/STANDBY (R)> blinks red while in the standby mode during the period
when the [QUICK STARTUP] function is valid. When [IN STANDBY MODE] in [AUDIO SETTING] is set to [OFF], the power indicator <ON
(G)/STANDBY (R)> will change to a red light when the specified time set in [VALID PERIOD] elapses after the projector enters the standby
mode. When [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON], even [QUICK STARTUP] is set to [ON], the power indicator <ON
(G)/STANDBY (R)> will not change to a red light when the specified time set in [VALID PERIOD] elapses.
f
When [QUICK STARTUP] is set to [ON], the standby period when the [QUICK STARTUP] function is valid will be added as the projector
runtime.
[RS-232C]
Set the communication condition of the <SERIAL IN> terminal. Refer to “<SERIAL IN> terminal” (
x
page 151).
Setting the communication condition of the <SERIAL IN> terminal
1) Press
as
to select [RS-232C].
2) Press the <ENTER> button.
f
The
[RS-232C]
screen is displayed.
3) Press
as
to select [BAUDRATE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[9600]
Select the proper communication speed.
[19200]
[38400]
5) Press
as
to select [PARITY].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Using the control command for the existing projector
Set this function when using the control command for previously purchased Panasonic projector to control this
projector with a computer using the <SERIAL IN> terminal on the projector. The existing Panasonic projector
control software, etc., can continually be used.
1) Press
as
to select [RS-232C].
2) Press the <ENTER> button.
f
The
[RS-232C]
screen is displayed.
3) Press
as
to select [EMULATE].
4) Press the <ENTER> button.
f
The
[EMULATE]
screen is displayed.
5) Press
as
to select an item.
[OFF]
Does not use existing control command for the projector.
[D3500]
D3500 series
[D4000]
D4000 series
[D/W5k SERIES]
D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
[D/W/Z6k SERIES]
DZ870 series, DW830 series, DX100 series, DZ780 series, DW750 series, DX820 series, DZ770
series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series, DW730 series,
DX800 series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series, D5000 series, DZ570
series, DW530 series, DX500 series, RZ970 series, RW930 series, RX110 series, RZ770 series,
RZ660 series, RW730 series, RW620 series, RZ670 series, RW630 series, RZ575 series, RZ570
series
[L730 SERIES]
L730 series, L720 series, L520 series
ENGLISH
-
89
Chapter 4 Settings - [PROJECTOR SETUP] menu
