Panasonic PT-LB75VEA Operating Instructions Manual Download Page 21

Page: 21 / 68

Switching the projector on/off

Basic Operation

NGLISH - 21

Switching on the projector

Before switching on the projector, make sure the power cord and all the other devices are connected correctly.

(

page 17)

INPUT SELECT

RELEASE

POWER

indicator

POWER LOCK

indicator

(2)

(3)

Connect the power cord.

1 )

(

page 19)

The

POWER LOCK

indicator and

POWER

indicator light in red.

Press the RELEASE button to unlock the POWER button.

2 )

The

POWER LOCK

indicator goes off.

When operating with the remote control, you do not need to press the

RELEASE

button.

Press the POWER button.

3 )

The

POWER

button beeps once.

You can turn

OFF

the beeping sound that occurs when you press the

POWER

button by menu setting.

(

page 41)

The

POWER

indicator flashes in green several times, then the

POWER

indicator lights up and the

STARTUP LOGO

is displayed. See “STARTUP LOGO” in the “DISPLAY OPTION” menu.

(

page 37)

Note

Operating the control panel buttons with covered hand, such as plastered or gloved, may result in operating

errors.

Remarks

Confirm that

CONTROL PANEL

(when operating with the projector body) or

REMOTE CONTROLLER

(when operating with the remote control) under

CONTROL DEVICE SETUP

in the

SECURITY

menu is set to

ENABLE

. (

page 44)

The projector does not operate when the

POWER

button of the projector body is pressed while it is locked.

If the

POWER

button is not being pressed in 10 seconds after the

RELEASE

button is pressed, the

POWER

LOCK

indicator lights in red and the

POWER

button remains locked. Press the

RELEASE

button again to unlock.

When starting up the projector, some small rattling or tinkling sound may be heard. Those are normal and will

not affect the performance of the projector.

When the internal cooling fan is operating, some operational sound may be heard. The loudness of the

operational sound depends on the external temperature.

INITIAL START UP

in the

PROJECTOR SETUP

menu is set to

, the projector starts projecting when the

power cord is connected to a wall outlet. (

page 39)

If the projector is switched on again while the internal cooling fan is still operating by the internal power supply,

the display may flicker for the characteristics of the lamp. Those are normal and will not affect the performance

of the projector.

Summary of Contents for PT-LB75VEA





































































Search results

Summary of Contents for PT-LB75VEA

Reviews:

Related manuals for PT-LB75VEA

Brands by name

Popular brands

Panasonic PT-LB75VEA, Operating Instructions Manual

Search results

Summary of Contents for PT-LB75VEA

Reviews:

Related manuals for PT-LB75VEA

Brands by name

Popular brands