Important Safety Notice
Important Information
E
NGLISH - 3
WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
•
FCC CAUTION:
To assure continued compliance, follow the attached installation instructions and use only
shielded interface cables when connecting to computer and/or peripheral devices. Any
changes or modifications not expressly approved by Panasonic Corp. of North America could
void the user’s authority to operate this device.
FCC RF Exposure Warning:
(if provided with wireless device)
This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment.
•
This equipment has been approved for mobile operation and requires minimum 20 cm spacing be provided
•
between antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless
modes of operation.
This equipment may not be used with other installed transmitters, which may be capable of simultaneous
•
transmission.
WARNING:
Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data
•
Processing Equipment, ANSI/NFPA 75.
For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
•
building installation wiring.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible
•
.
Declaration of Conformity
Model Number:
PT-LB90NTU/PT-LB90U/PT-LB78VU/PT-LB75VU
Trade Name:
Panasonic
Responsible party: Panasonic Corporation of North America
Address:
One Panasonic Way, Secaucus, New Jersey 07094
Telephone number: (888) 411 - 1996
E-mail:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information on Disposal in other Countries outside the European
These symbols are only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the
correct method of disposal.
Environment care information for users in China
This symbol is only valid in China.
