Panasonic PT-JX200HBU Operating Instrucctions Download

Page: 55 / 152

Chapter 3

Basic Operations — Using SD cards

ENGLISH - 55

Inserting an SD card

1) Insert the card securely into the SD card slot with the front of the card facing outward, from the side

with cut corner.

SD card

Attention

When using the miniSD memory card or the microSD memory card, always use the dedicated miniSD memory card adapter or the microSD

memory card adapter, and insert/eject together with the adapter.

Take care not to leave the adapter in the SD card slot.

Do not insert anything other than the SD card, such as metal or foreign object, into the SD card slot.

Please refrain from frequent insertion and ejection of the SD card in short period of time. Wait for at least five seconds after inserting until

ejecting the SD card, and wait for at least five seconds until inserting it again after ejecting. The projector requires approximately five

seconds to recognize the insertion or ejection of the SD card.

Ejecting the SD card

1)  Confirm that the SD card indicator <SD> is not blinking.
2)  Lightly press center of the SD card.
3)  Hold onto the slightly ejected SD card and pull it out.

Note that pulling out the card forcibly while it is inserted will cause a malfunction.

Attention

Do not perform the following when the projector is accessing the SD card (while the SD card indicator <SD> is blinking).

Ejecting the SD card

Turning off the power of the track system

Applying vibration or shock

Do not perform the insertion and ejection of the SD card in short period of time. Wait for at least five seconds after inserting until ejecting

the SD card, and wait for at least five seconds until inserting it again after ejecting. The projector requires approximately five seconds to

recognize the insertion and ejection of the SD card.

Summary of Contents for PT-JX200HBU

























































































































































Search results

Summary of Contents for PT-JX200HBU

Reviews:

Related manuals for PT-JX200HBU

Brands by name

Popular brands

Panasonic PT-JX200HBU, Operating Instrucctions

Search results

Summary of Contents for PT-JX200HBU

Reviews:

Related manuals for PT-JX200HBU

Brands by name

Popular brands