Maintenance/replacement
94
- ENGLISH
Maintenance
Clean the air filter unit
5 )
Removing the dust from the air filter unit
z
(i) Remove the dust from the air filter unit using a vacuum or other cleaner.
If the dust persists after cleaning with a vacuum, wash the air filter unit in water.
z
Washing the air filter unit
z
(i) Soak the air filter unit in water or warm water and rinse it lightly.
Do not use materials such as blushes or detergent.
z
When you rinse the air filter unit, hold the frame and avoid excessive force on the filter part.
z
(ii) Change the water two or three times while you rinse the air filter unit.
Rinse it until the cloud of the water clears. If the air filter unit is not rinsed sufficiently, odor may result.
z
Drying the air filter unit
z
Naturally dry the air filter unit in a well-ventilated place, avoiding dust and direct sunlight.
Do not use a hair drier or other drier.
z
Attach the air filter unit.
6 )
Hold the air filter unit that the tab is in left side in the figure, put the right side in the figure first, and press the
z
tab side until make a click sound.
Close and press up to lock the filter cover.
7 )
Make sure that the air filter cover is closed tightly.
z
Reset the filter counter.
8 )
Turn on the power and perform [Filter counter reset] in the [Setting] menu.
z
Attention
After washing the air filter unit, dry it thoroughly before attaching to the projector. Attaching wet air filter unit
z
may cause electric shock or malfunction.
Note
Be sure to attach the air filter unit properly. If you use the projector without attaching the air filter unit, the
z
projector may be damaged due to the dirt or dust.
If the air filter unit has been damaged or dirt remains even after washing it, replace it with a a new filter (Product
z
No.: ET-RFE200).
It is recommended that the air filter unit is replaced after two times of cleaning and reusing.
z
After washing, the capability of the air filter unit may decrease.
z
After washing the air filter unit, reset the filter counter. Otherwise, the power of the projector may be turned off
z
for safety.
