Panasonic PT-EW530E Operating Instructions Manual Download

Page: 7 / 118

Read this first!

ENGLISH -

Important

Information

To remove the battery

Remote Control Battery

1. Press the guide and lift the cover.

2. Remove the batteries.

CAUTION:

POWER

When disconnecting the power cord, be sure to hold the power plug and power connector.

If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric

shocks will result.

When not using the projector for an extended period of time, disconnect the power plug from the wall

outlet and remove the batteries from the remote control.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.

Electric shocks can result if this is not done.

ON USE/INSTALLATION

Do not put your weight on this projector.

You could fall or the projector could break, and injury will result.

Be especially careful not to let young children stand or sit on the projector.

Do not place the projector in extremely hot locations.

Doing so will cause the outer casing or internal components to deteriorate, or result in fire.

Take particular care in locations exposed to direct sunlight or near stoves.

Always disconnect all cables before moving the projector.

Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks

to occur.

Never plug headphones and earphones into AUDIO OUT jack.

Excessive sound pressure from earphones and headphones can cause hearing loss.

ACCESSORIES

Do not use the old lamp unit.

If used it could cause lamp explosion.

If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the

broken pieces.

Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which

contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces will cause injury.

If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek

medical advice immediately.

Ask your dealer about replacing the lamp unit and check the inside of the projector.

Do not attach wet air filter.

Doing so may result in electric shocks or malfunctions.

After washing the air filter, dry it thoroughly before attaching to the projector.

Summary of Contents for PT-EW530E























































































































Search results

Summary of Contents for PT-EW530E

Reviews:

Related manuals for PT-EW530E

Brands by name

Popular brands

Panasonic PT-EW530E, Operating Instructions Manual

Search results

Summary of Contents for PT-EW530E

Reviews:

Related manuals for PT-EW530E

Brands by name

Popular brands