Panasonic PT-EW530E Operating Instructions Manual Download

Page: 8 / 118

Read this first!

- ENGLISH

Important

Information

Trademarks

HDMI, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI

•

Licensing LLC.
PJLink™ is a trademark or pending trademark in Japan, the United States, and other countries and region.

•

RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc. Crestron Connected

•

and Fusion RV are the trademarks of Crestron Electronics, Inc.

Other names, company names or product names used in these operating instructions are the trademarks or

•

registered trademarks of their respective holders.

Please note that the operating instructions do not include the

and

symbols.

Illustrations in these operating instructions

Note that illustrations of the projector and screens may differ from the ones you actually see.

•

Page references

In these instructions, references to pages are indicated as: (

•

page 00).

Term

In these instructions, the “Wireless/Wired remote control unit” accessory is referred to as the “Remote control”.

•

Summary of Contents for PT-EW530E























































































































Search results

Summary of Contents for PT-EW530E

Reviews:

Related manuals for PT-EW530E

Brands by name

Popular brands

Panasonic PT-EW530E, Operating Instructions Manual

Search results

Summary of Contents for PT-EW530E

Reviews:

Related manuals for PT-EW530E

Brands by name

Popular brands