Panasonic PT-60LCX64-K, Service Manual, Page: 88 / 279

Fig. E1-2
Perform the necessary adjustments in numerical order in each section.
Necessary Equipment
Adjustment Item Section
Step
No.
Mechanical
(Projection Unit)
Adjustment
Section
Main C.B.A.
Adjustment
Section
LCD Drive
C.B.A.
Adjustment
Section
Input
·PC(1)/(2)
·RS232C I/F Tool
·Software(3)
·PC(1)
·PC(2) with 720p video graphics card
·RS232C I/F Tool
·Software(1)
·PC(1)/(2)
·RS232C I/F Tool
·Software(2)
·Screwdriver (+)/(-)
·NTSC Video Pattern Generator
·Screwdriver (+)
·PC(2)
·(NTSC Video Pattern Generator)
·PC(1)/(2)
·RS232C I/F Tool
·Software(1)
·NTSC Video Pattern Generator
·Color Temperature Meter
·Oscilloscope
·Monitor P.C.B.
·XGA Color PC Monitor
·PC(2) RGB Input Level Adjustment
Gamma Adjustment
Fan 2 Voltage Adjustment
Non-uniformity Color Correction
(compensation by inputting data)
VCOM Adjustment
Full Mirror Adjustment
Polarizer Adjustment
White Balance Adjustment
No signal
or
100% White Signal
Test Pattern Signal
·Gray Scale Pattern Signal
(3 scales)
or (16 scales)
Test Pattern Signal
·70% Red Horizontal Signal
·70% Green Horizontal Signal
·70% Blue Horizontal Signal
Gray Scale Pattern Signal
(10 scales)
Test Pattern Signal
·Gray Scale Pattern Signal
(16 scales)
·50% White Pattern Signal
---
No signal
or
Test Pattern Signal
·Black Signal
or
Black Signal
Test Pattern Signal
·50% White Pattern Signal
·PC(1)
·RS232C I/F Tool
·Digital Volt Meter
·Software(1)
·PC(1)
·RS232C I/F Tool
·Digital Volt Meter
·Software(1)
Fan 3 Voltage Adjustment ---
---
---
Test Pattern Signal
·Gray Scale Pattern Signal
(16 scales)
1
2
1
1
2
3
4
5
6
(VIDEO 1)
(RGB 1)
or
(VIDEO 1)
RGB 1
RGB 1
RGB 1
VIDEO 1
or
RGB 1
RGB 1
Note: The PC (1) must have a 10-key keyboard for LCD Drive Adjustment software (1).
The PC (2) is for Test Pattern Signal.
PT-60LCX64-K
88