manualshive.com logo in svg

Panasonic PT-60LCX64-K, Service Manual, Page: 77 / 279

Share
Download
Panasonic PT-60LCX64-K Service Manual Download Page 77

8. (PT-43LCX64/PT-50LCX64)

Remove the LCD/Prism Unit from the Projection Lens Unit by removing the 4 Screws (423).
(PT-60LCX64)
Remove the LCD/Prism Unit from the Projection Lens Unit by removing the 3 Screws (429).

Fig. P3-3

Replacement Note for Projection Lens Unit:
When replacing the Projection Lens Unit, place the Top Duct Sponge on the Projection Lens Unit as shown.

Fig. P3-4

Reassembly Note for LCD/Prism Unit and Projection Lens Unit:
1. Be sure to install the LCD/Prism Unit and the Projection Lens Unit before installing the Fan Case Unit. Otherwise, the Fan

Case Sponge, etc. will not fit properly with the Projection Lens Unit.

2. (PT-43LCX64/PT-50LCX64)

Be sure to install the LCD/Prism Unit and the Projection Lens to the Optical Block Unit as shown.

Fig. P3-5

Projection Lens Unit

Optical Block Unit

hole

align the center

hole

Projection Lens Unit

(PT-43LCX64/PT-50LCX64)

(PT-60LCX64)

LCD/Prism Unit

423

423

Projection Lens Unit

LCD/Prism Unit

429

Projection Lens Unit

Top Duct Sponge

Projection Lens Unit

Top Duct Sponge

(PT-43LCX64/PT-50LCX64)

(PT-60LCX64)

PT-60LCX64-K

77

Summary of Contents for PT-60LCX64-K
























































































































































































































































































Reviews:

No comments