manualshive.com logo in svg

Panasonic PT-60LCX64-K, Service Manual, Page: 73 / 279

Share
Download
Panasonic PT-60LCX64-K Service Manual Download Page 73

REMOVAL OF THE LCD DRIVE C.B.A.

1. Peel the Seal Tape 4.

Fig. P1-1

2. Remove the Top Duct 2 Unit by removing the 4 Screws (421).
3. (PT-43LCX64/PT-50LCX64)

Remove the Filter Unit by removing the 4 Screws (421).
Note: Do not touch the Air Filter.

4. (PT-43LCX64/PT-50LCX64)

Remove the Top Duct 1 Unit by removing the 4 Screws (458).

5. Disconnect Connector P2303, P2304, P2902, P2903.

Disconnect Connectors P2001, P2002, P2003 (LCD Panel Flexible Cable).
Note: Take extreme care not to damage the LCD Panel Flexible Cable.

6. Remove the LCD Drive Shield Case Top, the LCD Drive C.B.A., the LCD Drive Shield Case Bottom, and the GND Wire by

removing the 4 Screws (421).
(PT-43LCX64/PT-50LCX64)
Remove the clip.

7. Remove the LCD Drive C.B.A. from the LCD Drive Shield Case Top and the LCD Drive Shield Case Bottom.

Fig. P1-2

421

Top Duct 1 Unit

Filter Unit

Air Filter

421

475

421

421

Seal 
Tape 4

View A

Top Duct 2 Unit

421

421

LCD Drive Shield 
Case Top

LCD Drive Shield 
Case Bottom

P2903

P2002

P2003

Sheet

Sheet

Sheet

P2304

P2902

P2303

P2001

Clip

GND Wire
(PT-60LCX64)

View A

Top Duct 2 Unit

Top Duct 1 Unit

Seal Tape 4

Note:

To remove the LCD Drive C.B.A. of PT-60LCX64, it is not necessary to remove the Top Duct 1 Unit and the Filter Unit. 
However, to remove the LCD Drive C.B.A. of PT-43LCX64 or PT-50LCX64, it is necessary to remove the Top Duct 1 Unit and 
the Filter Unit prior to the LCD Drive C.B.A.

PT-60LCX64-K

73

Summary of Contents for PT-60LCX64-K
























































































































































































































































































Reviews:

No comments