manualshive.com logo in svg

Panasonic PT-60LCX64-K, Service Manual, Page: 46 / 279

Share
Download
Panasonic PT-60LCX64-K Service Manual Download Page 46

6 DISASSEMBLY/ASSEMBLY PROCEDURES

6.1. CABINET SECTION

DISASSEMBLY METHOD OF CABINET SECTION

Cabinet section contains following removal procedures:

CABINET SECTION

BALLAST C.B.A.

REAR COVER

FRONT COVER UNIT

OPTICAL COVER

LAMP COVER

NETWORK C.B.A.

TUNER C.B.A.

DTV Tuner  Unit

OPERATION C.B.A.

TV/TUNER UNIT

MAIN C.B.A.

REAR JACK C.B.A.

AUDIO AMP 

C.B.A.

POWER C.B.A.

(LCD/PRISM UNIT, LIGHT IN POLARIZER, ETC)

THERMISTOR 2 C.B.A.

THERMISTOR 1 C.B.A.

THERMAL FUSE UNIT

TOP DUCT 3 UNIT

(DISPLAY)

FAN 3 UNIT

FRONT JACK C.B.A.

COVER SWITCH C.B.A.

PROJECTION  UNIT

SPEAKER

SCREEN UNIT

MIRROR

BACK PANEL

Digital Tuner Power C.B.A.

REMOVAL OF THE BALLAST C.B.A. AND THE TV/TUNER UNIT FROM THE CABINET

REMOVAL OF THE PROJECTION UNIT FROM THE CABINET

REMOVAL OF THE TUNER C.B.A., THE DTV TUNER UNIT, THE MAIN C.B.A., THE DIGITAL TUNER POWER C.B.A., THE REAR JACK
C.B.A., THE AUDIO AMP C.B.A., THE POWER C.B.A. FROM THE TV/TUNER UNIT

REMOVAL OF THE SCREEN UNIT AND THE SPEAKER FROM THE DISPLAY

REMOVAL OF THE MIRROR FROM THE BACK COVER

REMOVAL OF THE FRONT JACK C.B.A. AND THE OPERATION C.B.A. FROM THE CABINET

REMOVAL OF THE COVER SWITCH C.B.A. FROM THE CABINET

REMOVAL OF THE BALLAST HOLD PLATE, THE BALLAST SHIELD CASE TOP, THE BALLAST SHIELD CASE BOTTOM

DISASSEMBLY FLOWCHART

This flow chart indicates the disassembly steps of the cabinet parts and the P.C.Boards in order to gain access to item (s) to be
serviced. When reassembling, perform the step (s) in the reverse order. Bend, route and dress the wires as they were originally.

Note :
a. Place a cloth or some other soft material under the P.C. Boards or Unit to prevent damage.
b. When reinstalling, ensure that the connectors are connected firmly and electrical components have not been damaged.
c. Do not supply power to the unit during disassembly and reassembly.

PT-60LCX64-K

46

Summary of Contents for PT-60LCX64-K
























































































































































































































































































Reviews:

No comments