manualshive.com logo in svg

Panasonic PT-60LCX64-K, Service Manual, Page: 72 / 279

Share
Download
Panasonic PT-60LCX64-K Service Manual Download Page 72

6.2. PROJECTION SECTION

DISASSEMBLY METHOD OF PROJECTION UNIT

When reassembling, perform the step (s) in the reverse order. Bend, route and dress the wires as they were originally.

PROJECTION SECTION

Note :
a. Place a cloth or some other soft material under the P.C. Boards or Unit to prevent damage.
b. When reinstalling, ensure that the connectors are connected firmly and electrical components have not been damaged.
c. Do not supply power to the unit during disassembly and reassembly.

When servicing these inner parts (LCD/Prism Unit, Light IN Polarizer Unit, etc.) of the Projection Unit, 
it is strongly recommended to replace at clean room or clean bench.

Note:

Fan Case Unit

Duct Unit

Top Duct 1 Unit

Filter Unit

Light IN 
Polarizer 
Red Unit

Light IN 
Polarizer 
Green Unit

Optical Block Unit and 
Optical Components

Joint Piece 
Unit

Light IN 
Polarizer 
Blue Unit

Projection 
Lens Unit

LCD/Prism Unit

Top Duct Sponge

PT-60LCX64-K

72

Summary of Contents for PT-60LCX64-K
























































































































































































































































































Reviews:

No comments