93
Available commands are listed below.
N Set a NAS ID (NAS Identifier).
Press "I." The command prompt changes to "Enter NAS ID>." Enter NAS ID within 16
one-byte characters.
I
Set an IP address of RADIUS server.
Press "I." The command prompt changes to " Enter RADIUS server index>." Enter a
RADIUS server entry number between 1 and 5. The command prompt changes to "
Enter IP address for radius server>." Enter an IP address.
C Set a common key of RADIUS server.
Press "C." The command prompt changes to " Enter RADIUS server index>." Enter a
RADIUS server entry number between 1 and 5. The command prompt changes to
"Enter secret string for server>." Enter a common key within 20 one-byte characters.
E
Set an encrypted common key of RADIUS server.
Press "E." The command prompt changes to " Enter RADIUS server index>." Enter a
RADIUS server entry number between 1 and 5. The command prompt changes to "
Enter secret string for server with encryption>." Enter a common key within 20
one-byte characters.
R Set a response time until the RADIUS server responds to authentication request.
Press "R." The command prompt changes to " Enter RADIUS server index>." Enter a
RADIUS server entry number between 1 and 5. The command prompt changes to
"Enter response time>." Enter the response time with a value of 1 to 120 (seconds).
M Set the maximum number of retransmission times for authentication request.
Press "M." The command prompt changes to " Enter RADIUS server index>." Enter a
RADIUS server entry number between 1 and 5. The command prompt changes to
"Enter maximum retransmission>." Enter an integer number of 1 to 254.
P
Set IPv6 RADIUS Server settings.
Press "P." The IPv6 RADIUS Server Menu opens. For configuration details, refer to
the next section (4.6.7.d).
Q Return to the previous menu.
