231
Screen Description
Port
Shows the port number.
Refresh
Shows the refresh interval of the screen. (Factory default setting:
300 seconds)
Elapsed Time
Since Reset
Shows the time elapsed since resetting counters.
Counter Name
Shows each counter name.
Total
Shows each counter value.
Avg./s
Shows the average per second of each counter.
Available commands are listed below.
N Show the values of the next port.
Press "N." The screen shows the counter values of the next port. Disabled in Port
24.
P
Show the values of the previous port.
Press "P." The screen shows the counter values of the previous port. Disabled in
Port 1.
S
Switch a target port.
Press "S." The command prompt changes to "Select Port number>." Enter the
port number you wish to display.
F
Set the counter refresh mode.
Press "F." The command prompt changes to "1 for start to refresh, 2 for set
refresh rate." Press "1" to stop auto-refresh. Press "2" to change the refresh
interval.
If you press "2," the command prompt changes to "Input refresh time>." Enter
an integer between 5 and 600 (seconds).
R Switch to display counter values since resetting counters.
Press "R" to reset the counter values. Elapsed Time Since System Reset becomes
0.
U Set the screen refresh mode.
Press "U" to display counters since booting.
Q Return to the previous menu.