9
RECOMMENDATION
- Allow clearance to the floor for venting purposes. Screw the feet out a minimum of 15 mm
from the bottom of the product.
3.5.6 Fitting instructions
3.5.5 Pipe connection layout
3.5.7 Installation recommendation
!
CAUTION
!
The product should be placed in a room with a drain to avoid any damages in case of
water escaping from the product.
!
The product should be placed on a floor surface suitable for the total weight of the prod-
uct when in operation. See product data plate.
!
The product must have a service clearance of 120 cm in front of the cover / 50 cm on top.
!
WARNING
!
The product must be filled with water before the power is switched on.
!
Any overflow pipe from the T&P valve must be installed uninterruptable and frost-free
with a continuous fall to the drain/gully.
20
30
40
50 60 70
80
90
100
110
10
120
0
°C
DHW
Radiator circuit
outdoor unit
Heat pump circuit
indoor
unit
Summary of Contents for PAW-TD23B6E5
