manualshive.com logo in svg

Panasonic PANAFAX DF-1100, User Manual

The Panasonic PANAFAX DF-1100 Service Manual is your go-to resource for maintaining and troubleshooting this advanced fax machine. With our website, you can conveniently download the manual for free. Unlock the full potential of your device with step-by-step instructions and technical details, accessible at manualshive.com.

Share
Download
background image

203

FCC Notice for User in USA

WARNING

!

This equipment generates radio frequency energy and if not installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to
comply with the limits for a Class B digital device in accordance with the specifications of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or
television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:

(1) Reorient the receiving antenna.
(2) Relocate your fax machine with respect to the receiver.
(3) Move your fax machine away from the receiver.
(4) Plug your fax machine into a different outlet so that your fax machine and receiver are on different branch circuits.

If necessary, you should consult the dealer or an experienced radio / television technician for additional suggestions. To
assure continued FCC emission limit compliance, the user must operate this device in accordance with these instructions and
do not make any unauthorized changes or modifications.

This equipment complies with Part 68 of the FCC Rules. On the rear panel of this equipment is a label  that
contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for
this equipment. You must, upon request, provide this information to your telephone company.

Ask your telephone company or installer to install the jack suitable for your device if such is not available.

The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those
devices ring when your telephone number is called. In most, but not all areas, the sum of the REN ’s of all devices connected
to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined
by the REN, you should contact your local telephone company to determine the maximum REN for your calling area.

If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue your service
temporarily. If possible, they will notify you in advance. But if advance notice isn’t practical, you will be notified as soon as
possible. You will be informed of your right to file a complaint with FCC.

Your telephone company may make changes in it’s facilities, equipment, operations or procedures that could affect the proper
functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service.

If you experience trouble with this telephone equipment, please contact the manufacturer’s authorized service agency for
information on obtaining service or repairs. The telephone company may ask that you disconnect this equipment from the
network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.

WARNING

!

For protection against the risk of electric shock,  always disconnect all cables from the wall outlet before servicing, modifying
or installing the equipment.

This equipment may not be used on coin service provided by the telephone company nor connected to party lines.

09004000001

Note:

09004100001

9

Summary of Contents for PANAFAX DF-1100






























































































































































































































Reviews:

No comments

Related manuals for PANAFAX DF-1100

Baby Lock imagine Quick Reference Threading Manual preview
imagine
Brand: Baby Lock Pages: 2
Clarke 7310000 Operation & Maintenance Instructions preview
7310000
Brand: Clarke Pages: 4
Ibiza 15-1110 User Manual preview
15-1110
Brand: Ibiza Pages: 16
Janome CoverPro 1000CP Service Manual preview
CoverPro 1000CP
Brand: Janome Pages: 21
PHC PHC17F Operation & Care Instructions preview
PHC17F
Brand: PHC Pages: 4
GBC ibico clickman Instruction Manual preview
ibico clickman
Brand: GBC Pages: 10
JUKI AMS-221EN-HS3020/7200 Instruction Manual & Parts List preview
AMS-221EN-HS3020/7200
Brand: JUKI Pages: 70
SCANMASKIN SC-330 3 Manual preview
SC-330 3
Brand: SCANMASKIN Pages: 62
Husqvarna BB 700 Operator'S Manual preview
BB 700
Brand: Husqvarna Pages: 80
Kenmore 385.11703 Owner'S Manual preview
385.11703
Brand: Kenmore Pages: 41
Kenmore 385.12102 Owner'S Manual preview
385.12102
Brand: Kenmore Pages: 69
Kenmore 385.15008100 Owner'S Manual preview
385.15008100
Brand: Kenmore Pages: 75
Kenmore 385.12912 Owner'S Manual preview
385.12912
Brand: Kenmore Pages: 79
Kenmore 385.12216 Owner'S Manual preview
385.12216
Brand: Kenmore Pages: 79
Kenmore 385.12318 Owner'S Manual preview
385.12318
Brand: Kenmore Pages: 83
Kenmore 385.12612090 Owner'S Manual preview
385.12612090
Brand: Kenmore Pages: 50
Kenmore 385.12514 Owner'S Manual preview
385.12514
Brand: Kenmore Pages: 45
Kenmore 17651 Owner'S Manual preview
17651
Brand: Kenmore Pages: 59

Brands by name

Popular brands

Load more brands