Panasonic PANAFAX DF-1100 User Manual Download Page 191

Page: 191 / 221

189

Troubleshooting

Info.

Code

Meaning

Action

Page

540/541

542

543/544

Communication error occurred while transmitting.

1. Reload the document and send again.

2. Check with the other party.

550

Telephone line disconnected.

Check with the other party.

552/553
554/555

Communication error occurred while receiving.

Check with the other party.

580

Sub-address transmission to a unit that has no
Sub-address function.

Check the remote station.

164

581

Sub-address Password transmission to a unit that
has no Password Sub-address function.

Check the remote station.

164

601

ADF Door was opened during ADF transmission.

Close the ADF Door.

191

602

Platen Cover was opened during ADF
transmission.

Close the Platen Cover.

191

623

No document loaded on the ADF.

Reload the document and send again.

630

Redial was not successful due to a busy line or no
response from the called station.

Reload the document and send again.

631

During dialing, [STOP] was pressed.

Reload the document and send again.

634

Redial was not successful due to a busy line or no
response from the called station.

Reload the document and send again.

Note: Canadian Models will not redial when the

communication fails due to no response
from the called station.

638

Power failure occurred during the communication. Check the power cord and plug.

870

Memory overflow occurred while storing
documents into memory for transmission or
copying.

Transmit or Copy documents without storing into
memory.
Order additional memory option.

201

879

Memory overflow occurred while receiving
documents into memory.
Receiving documents with data that is greater than
the memory size.

1. Check recording paper and toner cartridge.

2. Install Optional Memory Card.

202

975

DRAM parity error. The document information in
memory is lost.

1. Unit will print out a Power Failure Report.

2. Resend the lost document.

183

08001000001

08001080016
#@multitude

08001080051

08001080052

08001080053

08001080087

08001080088

08001080092

08001080106

08001080054

08001080055

08001080056

08001080057

08001080058

08001080059

08001080074

08001080062

Summary of Contents for PANAFAX DF-1100






























































































































































































































Search results

Summary of Contents for PANAFAX DF-1100

Reviews:

Related manuals for PANAFAX DF-1100

Brands by name

Popular brands

Panasonic PANAFAX DF-1100, User Manual

Search results

Summary of Contents for PANAFAX DF-1100

Reviews:

Related manuals for PANAFAX DF-1100

Brands by name

Popular brands