Panasonic NV-GS40, Operating Instructions Manual

Page: 13 / 76

Before Use
-13-
2
Adjust by turning the Eyepiece Corrector
Knob
(37)
.
ª
Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1
Put a finger on the [OPEN
4
] Knob (1) and
pull the LCD Monitor (2) out about 90
o
in the
direction of the arrow.
≥
The Viewfinder goes off.
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥
The LCD Monitor can rotate a maximum of
180
o
1 from the vertical position to the
upward direction and a maximum of 90
o
2 to
the downward direction. Forcefully rotating
the LCD Monitor beyond these ranges will
damage the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
≥
Make sure the Card Slot Cover is closed.
ª
Adjusting Brightness and Colour
Level
When [LCD/EVF SET] on the [DISPLAY SETUP]
Sub-Menu is set to [YES], the following items are
displayed.
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
(37)
(2)
(1)
2
90
o
1
180
o
LCD/EVF SET
PRESS MENU TO RETURN
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
It adjusts the colour saturation of the image on
the LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
It adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be
adjusted, and then turn the [PUSH] Dial to raise
or lower the number of vertical bars in the Bar
Indication.
≥
A larger number of vertical bars indicates
stronger brightness or colour saturation.
To Increase the Brightness of the Entire LCD
Monitor
Set the [LCD MODE] on the [DISPLAY SETUP]
Sub-Menu to [BRIGHT].
≥
These adjustments do not affect the recorded
images.
≥
For other notes concerning this item, see
-64-
.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Movie Camera displays various
function setups on Menus.
1
Press the [MENU] Button
(46)
.
≥
The Menu corresponding to the Mode
selected by using the [OFF/ON/MODE]
Switch
(43)
is displayed.
2
Turn the [PUSH] Dial
(38)
to select a desired
Sub-Menu.
≥
Turn the [PUSH] Dial
(38)
to display the
highlightened item.
3
Press the [PUSH] Dial (38) to display the
selected Sub-Menu.
4
Turn the [PUSH] Dial (38) to select the item
to be set.
M E N U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(46) (38)
(43)
OF
F
ON M
ODE
50B-ENG.book 13 ページ ２００３年１月１７日 金曜日 午後５時２９分