Instructions on Use
Press to start
6
• When you want to adjust the drying function included in the previous program, you can do so by pressing
the Dry button. Each time you press, you can switch the drying mode according to the chart below.
The display indicators will light on in turn.
• Drying starts according to the selected program,
and ends with 6 beep sounds.
• If you do not press this button after the above steps,
power will be automatically turned off after 10 minutes.
Press and select drying
5
●
Take out the items after 30 minutes from
the end of operation (to avoid burns).
●
Clean the filter after each operation. (page EN13)
Basic, Intense program
Speedy, Care program
Dry Only program
Eco program
■
Delay Start program
You can preset to start the operation 4 hours later by the following procedure.
Press , the indicator for
in th
e display will light up,
After step 5 in pages EN9 - EN11,
(operation will start 4 hours later)
press
●
You cannot use the Delay Start function in Dry Only, Speedy, Sanitize programs.
●
If you want to cancel Delay Start, press , the indicator “4 hours” will light off.
●
After adjusting the drying mode, the overall operating time will also change.
●
When No Drying is selected, air blowing will continue for about 3 minutes (about 30 minutes if dishwasher
salt is added), which is normal. (This is to discharge some of the hot air to avoid burns.)
EN11
0.5 h
0.5 h
1 h
1 h
↓
↓
↓
↓
↓
↓
Air
No Drying
Air
Keep
Factory
setting
+
Keep
+
Keep
+
Air
1 h
Air
No Drying
↓
↓
↓
↓
↓
↓
0.5 h
1 h
0.5 h
Keep
+
Keep
+
No Drying
Air
0.5 h
0.5 h
↓
↓
↓
↓
↓
↓
1 h
Air
1 h
Keep
+
Keep
+
Keep
+
Keep
+
1 h
0.5 h
↓
Reminder
Caution
Reminder
Drying · Delay Start · Changing the settings
■
Changing the settings
Various settings can be changed according to your preference or actual situation.
If you want to enhance the washing performance by extending the
washing time, change the settings as follows.
If you want to enhance the drying performance by extending the drying
time, change the settings as follows.
Enhanced drying settings
1
Press
Delay Start
and
Start/Pause
for 2.5 seconds simultaneously.
Start setting after 2 beep sounds.
2
Press
Delay Start
, and select
function code “1 h”.
3
Press
Program
again and select
the option code as needed
(whether to enhance washing).
4
Press
Start/Pause
to save the
setting and 6 beep sounds complete
the setting.
1
Press
Delay Start
and
Start/Pause
for 2.5 seconds simultaneously.
Start setting after 2 beep sounds.
2
Press
Delay Start
and select the
function code “Air + 1 h”.
3
Press
Program
again and select
the option code as needed
(whether to enhance drying).
4
Press
Start/Pause
to save the
setting and 6 beep sounds complete
the setting.
Disable the buzzer setting after operation
1
Press
Delay Start
and
Start/Pause
for 2.5 seconds simultaneously.
Start setting after 2 beep sounds.
2
Press
Delay Start
and select the
function code “0.5 h”.
3
Press
Program
again and select the
option code as needed (whether to
disable the buzzer for operation
completion).
4
Press
Start/Pause
to save the setting
and 6 beep sounds complete the setting.
Confirm power is turn off
Confirm power is turn off
Confirm power is turned off
Enhanced washing settings
If you want to disable the buzzer at the completion
of the dishwashing, make the changes as follows.
*
Indicates that the operation mode is factory set.
EN12
Option code
(whether to enhance
drying)
(press Program)
Air + 1 h
0
No need
Air + 1 h *
1
Enhanced
Air + 1 h
+ Intense
Function code
(press
Delay Start)
Display indicator
(lights up)
Option code
(whether to enhance
washing)
(press Program)
Display indicator
(lights up)
1 h
0
No need
1
Enhanced
1 h + Intense
Function code
(press
Delay Start)
1 h *
Function code
(press
Delay Start)
Option code
(whether to enable or
disable the buzzer for
operation completion)
(press Program)
0.5 h
0
Disable
0.5 h
1
Enable
0.5 h
+ Intense *
Display indicator
(lights up)
NP-TH1HK.indd 14
2018/11/15 9:30:17
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0014_NP-TH1HK.pdf
Refine Time
2018-11-15 09:38:54
Print Time
2018-12-10 15:24:57
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0014_NP-TH1HK.pdf
Refine Time
2018-11-15 09:38:54
Print Time
2018-12-10 15:24:57
English
Instructions on Use
Press to start
6
• When you want to adjust the drying function included in the previous program, you can do so by pressing
the Dry button. Each time you press, you can switch the drying mode according to the chart below.
The display indicators will light on in turn.
• Drying starts according to the selected program,
and ends with 6 beep sounds.
• If you do not press this button after the above steps,
power will be automatically turned off after 10 minutes.
Press and select drying
5
●
Take out the items after 30 minutes from
the end of operation (to avoid burns).
●
Clean the filter after each operation. (page EN13)
Basic, Intense program
Speedy, Care program
Dry Only program
Eco program
■
Delay Start program
You can preset to start the operation 4 hours later by the following procedure.
Press , the indicator for
in th
e display will light up,
After step 5 in pages EN9 - EN11,
(operation will start 4 hours later)
press
●
You cannot use the Delay Start function in Dry Only, Speedy, Sanitize programs.
●
If you want to cancel Delay Start, press , the indicator “4 hours” will light off.
●
After adjusting the drying mode, the overall operating time will also change.
●
When No Drying is selected, air blowing will continue for about 3 minutes (about 30 minutes if dishwasher
salt is added), which is normal. (This is to discharge some of the hot air to avoid burns.)
EN11
0.5 h
0.5 h
1 h
1 h
↓
↓
↓
↓
↓
↓
Air
No Drying
Air
Keep
Factory
setting
+
Keep
+
Keep
+
Air
1 h
Air
No Drying
↓
↓
↓
↓
↓
↓
0.5 h
1 h
0.5 h
Keep
+
Keep
+
No Drying
Air
0.5 h
0.5 h
↓
↓
↓
↓
↓
↓
1 h
Air
1 h
Keep
+
Keep
+
Keep
+
Keep
+
1 h
0.5 h
↓
Reminder
Caution
Reminder
Drying · Delay Start · Changing the settings
■
Changing the settings
Various settings can be changed according to your preference or actual situation.
If you want to enhance the washing performance by extending the
washing time, change the settings as follows.
If you want to enhance the drying performance by extending the drying
time, change the settings as follows.
Enhanced drying settings
1
Press
Delay Start
and
Start/Pause
for 2.5 seconds simultaneously.
Start setting after 2 beep sounds.
2
Press
Delay Start
, and select
function code “1 h”.
3
Press
Program
again and select
the option code as needed
(whether to enhance washing).
4
Press
Start/Pause
to save the
setting and 6 beep sounds complete
the setting.
1
Press
Delay Start
and
Start/Pause
for 2.5 seconds simultaneously.
Start setting after 2 beep sounds.
2
Press
Delay Start
and select the
function code “Air + 1 h”.
3
Press
Program
again and select
the option code as needed
(whether to enhance drying).
4
Press
Start/Pause
to save the
setting and 6 beep sounds complete
the setting.
Disable the buzzer setting after operation
1
Press
Delay Start
and
Start/Pause
for 2.5 seconds simultaneously.
Start setting after 2 beep sounds.
2
Press
Delay Start
and select the
function code “0.5 h”.
3
Press
Program
again and select the
option code as needed (whether to
disable the buzzer for operation
completion).
4
Press
Start/Pause
to save the setting
and 6 beep sounds complete the setting.
Confirm power is turn off
Confirm power is turn off
Confirm power is turned off
Enhanced washing settings
If you want to disable the buzzer at the completion
of the dishwashing, make the changes as follows.
*
Indicates that the operation mode is factory set.
EN12
Option code
(whether to enhance
drying)
(press Program)
Air + 1 h
0
No need
Air + 1 h *
1
Enhanced
Air + 1 h
+ Intense
Function code
(press
Delay Start)
Display indicator
(lights up)
Option code
(whether to enhance
washing)
(press Program)
Display indicator
(lights up)
1 h
0
No need
1
Enhanced
1 h + Intense
Function code
(press
Delay Start)
1 h *
Function code
(press
Delay Start)
Option code
(whether to enable or
disable the buzzer for
operation completion)
(press Program)
0.5 h
0
Disable
0.5 h
1
Enable
0.5 h
+ Intense *
Display indicator
(lights up)
NP-TH1HK.indd 15
2018/11/15 9:30:20
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0015_NP-TH1HK.pdf
Refine Time
2018-11-15 09:38:53
Print Time
2018-12-10 15:24:58
