15
Engl
ish
Electronic 3-way auto shut-off function (NI-JWT980 only)
• The Auto Shut-Off feature is not intended to take the place of unplugging the
cord. The Auto Shut-Off system works regardless of the position of the Power
Switch.
1.
When the iron is left idle with its Soleplate facing down or on its side for
approx. 1 minute, the iron will automatically shut off.
2.
When the iron is left idle on its Heel Rest for approx. 10 minutes, the iron will
automatically shut off.
3.
To resume ironing and turn the iron on, simply move the iron. Allow the iron
to reheat until the Thermostat Operating Indicator Light switches off.
1 minute
1 minute
10 minutes
Always unplug the iron when you fi nish ironing. Even though the Iron is
unplugged, the soleplate is still hot. Be sure to rest the iron on its heel, away
from fabric.
How to care for your iron
X
After each use
1. Set the Power Switch to “ ”.
2. Unplug.
3.
Set the Steam/Dry Selector to the Dry position.
If the Steam/Dry Selector is not in the Dry position
after using, remaining water will move into the
Soleplate and can result in burns when the iron is
used next time.
4.
Empty the Water Tank immediately after using. Do
not store the iron with water in it. If you empty the
Water Tank after it has cooled, heat the iron for
about 5 minutes with the Power Switch set to “ ”.
• Do not use the Steam or the “Power Shot” while
unplugged or the Power Switch is set to “ ”,
water will remain inside the Soleplate and cause
staining.
• Do not wind the Power Cord around the iron.
It may be damaged by the hot Soleplate.
NI-JWT980̲960̲Eng.indd 15
NI-JWT980̲960̲Eng.indd 15
2015/11/09 14:41:11
2015/11/09 14:41:11
