Panasonic NC-HKT081, Operating Instructions Manual

Page: 2 / 16

English
EN2 EN3
Contents
Page
Safety Precautions EN3
Important Information EN8
Parts Names and Operation Instructions EN9
How to Use EN10
How to Clean EN12
Troubleshooting EN13
Specifications EN15
Thank you for purchasing the Panasonic product.
●
This product is intended for household use only.
●
This product can only use for boiling water, it does not have thermal insulation function.
●
Please read these instructions carefully to use the product correctly and safely.
●
Before using this product please give your special attention to “Safety Precautions”
and “Important Information” (Page EN3-8).
●
Please keep this Operating Instructions for future use.
●
Panasonic will not accept any liability if the appliance is subject to improper use, or failure
to comply with these instructions.
Safety Precautions
Please make sure to follow
these instructions
In order to prevent accidents or injuries to the user, other people,
and damage to property, please follow the instructions below.
■
The following charts indicate the degree of damage caused
by wrong operation.
WARNING:
Indicates potential hazard that could result
in serious injury or death.
CAUTION:
Indicates potential hazard that could result
in minor injury or property damage.
■
The symbols are classified and explained as follows.
This symbol indicates an action that must be avoided.
This symbol indicates an action that must be carried out.
WARNING
To avoid risk of electric shock, fire due to short circuit,
smoke, burn or injury.
●
Do not disassemble, repair or modify this appliance.
➜
Consult the place of purchase or a Panasonic service center.
●
Do not damage the power cord or power plug.
Following actions are strictly prohibited.
Modifying, touching on or placing near
heating elements, bending, twisting, pulling,
pulled over sharp edges, putting heavy objects
on top, bundling the power cord and carrying
the appliance by the power cord.
●
Do not use the appliance if the power cord or power plug is
damaged or the power plug is loosely connected to the outlet.
➜
If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person
in order to avoid a hazard.
Power cord
Power plug