Panasonic NC-HKT081, Operating Instructions Manual

Page: 8 / 16

English
EN14 EN15
Problem Cause and Action
The hot water has a
strange smell.
●
Depending on the amount of chloride contained in the
water supply, there may be a residual chalky smell.
Shiny white or brown
substances are
floating in the hot
water.
●
This is limescale.
Limescale is more likely to
be generated when using
water with a high mineral
content.
• Mineral water.
• Water from ionic water
purifiers.
●
Clean the machine with a
limescale remover.
(P. EN12)
Rough milky white
substances are
adhered to parts
inside the body.
The sound of water
boiling has become
very loud.
●
The sound becomes
louder when the
limescale accumulate.
A clicking sound is
heard a short time
after use.
●
This sound is made when an internal heat component
cools down.
This is not malfunction.
The machine is taking
a long time to boil.
●
Did you boil with the lid
open?
●
Close the lid. (P. EN10)
●
Limescale build up.
●
Clean the machine with a
limescale remover.
(P. EN12)
●
If the water is very cold, the machine will take longer time
to boil.
When pouring and
disassemble the lid,
there is a "karla"
sound.
●
This is the sound of hammer to prevent the hot water
flow out when accidental overturn happens. This is not a
abnormality.
Troubleshooting Specifications
NC-HKT081
Power supply 220 V 50 Hz
Power consumption 1200 W
Dimensions
(W × D × H)
(approx.)
Body 22.1 cm × 14.8 cm × 19.3 cm
Body + Power base 22.1 cm × 14.8 cm × 21.1 cm
Weight
(approx.)
Body 1.0 k g
Body + Power base 1.2 k g
Rated capacity 0.8 L
Length of the power cord (approx.) 0.73 m
Overheat protection Temperature fuse
●
In certain regions (high altitude, very cold locations), it may not be possible to obtain the
predetermined performance.