Panasonic NC-HKT081, Operating Instructions Manual, Page: 5 / 16

English
EN8 EN9
Important Information Parts Names and Operation Instructions
●
Do not drop the body or power base to avoid damaging it.
●
Do not move the body or power base by dragging.
(It may scratch the table or work surface.)
●
Do not turn the power switch on when no water inside the body.
(It may cause malfunction.)
●
Do not use the appliance at outdoors.
●
Make sure the appliance is properly located on the stand before
switching on.
●
Beware of steam when the appliance is refill with water
immediately after boiled.
●
Do not move the appliance by holding the lid.
●
Make sure to clean the appliance after every use.
This symbol on the products indicates “hot surface and should
not be touched without caution”.
●
Clean the appliance by following the steps below for the first time or when you have
not used it for a while.
① Fill water up to the maximum water level and boil. (P. EN10)
② Pour the water out from the spout. (P. EN11 After use, pour out any remaining water.)
●
Do not use power strip or extension cord.
Before use
Power base (Stand)
Power cord
Power plug
Power switch
Vent
Open lid button
Spout
Vessel
Body
Lid
Lock lever
Handle
Body connector
Body connector
Lid Seal Packing
On
Power base connector
Indicating
pourable status
Indicating sealing
status