background image

9

Fuzzy logic control is used to recommend the proper water level and amount of detergent for the 

amount of laundry being done. 

Caution: 

If you need to change the [PROGRAM] and [SOAK] settings after the cycle has already started, turn the power off and on

 it back. 

Operations Panel

WASH, SPIN 

 

Press this button, and the 

pre-set laundry cycle display 

will turn off allowing you to 

choose your own laundry 

setting.

W

A

TER LEVEL

 

(Water volume display) 

 

The appropriate WATER LEVEL for the size and 

type of your own laundry will be displayed 

 

(LINEAR WATER LEVEL) If set as the 

 

WATER LEVEL which is not in the 

 

display, the nearest WATER LEVEL 

 

will be displayed. 

•  

You can adjust the WATER LEVEL 

 

according to your desired level. 

•  

The water level varies for models NA-F80T1.

T

ime display 

 

When the machine is in operation, the time display 

shows how much time (in minutes) is left.

 

When the programmable timer has been set, this 

display shows how much time is left until the wash 

is 

fi

 nished by pressing the [RESERVE] button.

 

Timer indication on the panel will show longer time 

than selected time as it includes water feeding, 

draining, etc.

RINSE 

 

Press this button, and the pre-

set laundry cycle display will 

turn off allowing you to choose 

your own laundry setting.

 

At “REFILL” selection, water 

will besupplied while “RINSE” 

process is in operation.

SOAK 

 

Operations course for heavily washed laundry.

 

You can adjust soak time based on the condition of dirt.

 

You can choose your soak time from 1, 3, 5, 8 hours.

START/HOLD 

 

Press this to start.

 

Press this to stop in 

themiddle of the cycle.

PROGRAM 

(Course Select) 

 

According to type of laundry 

and stain, you can select 

suitable course yourself.

OFF/ON 

 

The power automatically turns off when total

 

operations is 

fi

 nished.

 

The power automatically turns off if [START/HOLD]

 

button is not pressed within 10 minutes after turning

 

on the power.

RESERVE 

 

Press the [RESERVE] button to set how many hours later you 

would like the wash to be completed. See page 14 for details.

NA-F90T1 80T1_EN.indd   9

NA-F90T1 80T1_EN.indd   9

9/17/08   9:45:02 AM

9/17/08   9:45:02 AM

Summary of Contents for NA-F90T1

























Reviews: