Panasonic NA-F90T1, Operating Instructions Manual

Page: 7 / 24

7
Figure A
Liquid bleach level
Cap mark level
How to use liquid detergent
Put in the liquid detergent according to the
water level into the bleach / liquid detergent
inlet.
Bleach / Liquid Detergent Inlet
[NOTE]
• Liquid detergent, like powdered
detergent is not easily dissolved
and can leave scum along the
inside of the washing tub, so be
sure to rinse thoroughly.
■
Liquid bleach
• Dilute fully with water and pour in before
pressing [START/HOLD].
■
Powder bleach
• Place directly into the tub during fi ll.
• Follow the instruction on the bleach
container.
Bleach / Liquid Detergent inlet
(Insert completely)
How to use bleach
Except for CLEAN WHITE Course
Put in liquid bleach according to the water level, at the same time as you add detergent.
(The liquid bleach is to be automatically poured in the tub during the second rinse.)
w
Softener is easy to get hard, so do not leave it in the Softener Compartment for many hours (12 hours or longer).
w
Dilute the concentrated softener with the same volume of water only when using the wash with the
programmable time.
How to use softener
Water level
71L
(69L in the case
of NA-F80T1)
60L 52L 43L 33L 18L
Softener
Normal
Approx. 48ml
(46ml)
Approx. 40ml Approx. 35ml Approx. 29ml Approx. 22ml Approx. 12ml
Concentrated
Approx. 16ml
(15ml)
Approx. 14ml Approx. 12ml Approx. 10ml Approx. 8ml Approx. 4ml
Put in softener according to the water level, at the same time as you add detergent.
(The softener is to be automatically poured in the tub during the last rinse.)
(Insert completely)
Figure A
Softener level
Cap mark level
• If the machine is in operation, press the [START/
HOLD] button and add the liquid bleach.
NOTE:
When selecting the “CLEAN WHITE” Course, put the
liquid bleach into the Softener/Bleach Compartment.
Keep the level of the liquid bleach below the cap
mark (Figure A).
The indication is prevent the liquid bleach from
fl owing
immediately.
• If the machine is in operation, press the [START/
HOLD] button and add the softener.
NOTE:
Always put the softener into the Softener Compartment.
Keep the level of the softener below the cap mark
(Figure A).
The indication is to prevent the softener from
fl owing immediately.
Table of softener quantities
(Normal) ............. 20 ml softener per 30L of water. (Concentrated) ... 6.6 ml softener per 30L of water.
Concentrated softener Water
How to use liquid bleach for CLEAN WHITE Course
w
See page 13 for detail of “CLEAN WHITE” Course.
NA-F90T1 80T1_EN.indd 7 NA-F90T1 80T1_EN.indd 7 9/17/08 9:44:54 AM 9/17/08 9:44:54 AM