Panasonic NA-F90T1 Operating Instructions Manual Download Page 23

Page: 23 / 24

Error Indication

If the following indications appear on the display panel (buzzer sounds, U and H Characters appear).

Speci

cation

Model

NA-F90T1

NA-F80T1

Voltage

220 – 240V~

50 Hz

Power consumption

470 W

450 W

Standard water amount

71 L

69 L

Maximum capacity

9.0 k

8.0 k

Length of power cord

(Approx. 1.6 m)

W x L x H

643 x 637 x 1010 (mm)

Net weight

41 k

U11

• Check if abnormalities listed below are

seen in the external water hose.

• Is the hose connected?
• Is it clogged with lint?
• Is it crushed?
• Is the tip soaked in water?
• Is a part of hose at a height of over 10

cm midway?

• Is the extension hose longer than 3 m?
• Is the hose being used too small?

Restart with
opening and
closing the lid.

U12

• Check if the lid is opened.
• Close the lid.

U13

• Is the washing machine is an unsteady position, or is it on an

inclined

oor surface?

• Is the laundry unevenly distributed in the tub?
• Arrange the laundry evenly in the tub, then close the lid.

U14

• Check if you have forgotten to connect

the water hose and to turn on the faucet.

• Is the water supply cut off?

Restart with opening

and closing the lid.

U99

• Check if lid is open when draining operation of the [CHILD LOCK]

program is ON.

See page 15 for the reset method of an alarm.

H01

• In case of H displays such as “H01”, with no buzzer sounds pull

out the power plug, and contact your dealer for service.

NA-F90T1 80T1_EN.indd 23

9/17/08 9:45:56 AM

Summary of Contents for NA-F90T1

























Search results

Summary of Contents for NA-F90T1

Reviews:

Related manuals for NA-F90T1

Brands by name

Popular brands

Panasonic NA-F90T1, Operating Instructions Manual

Search results

Summary of Contents for NA-F90T1

Reviews:

Related manuals for NA-F90T1

Brands by name

Popular brands