17
Maintenance
Lint
fi
lter / Water supply hose
fi
lter / Main unit and tub
• Be absolutely sure to follow the procedures as
described, otherwise water will spray out.
1. Turn off the water faucet.
2. Press the [POWER ON] button.
3. Press the [START/HOLD] button.
The WATER LEVEL will light up a few seconds later.
4. Press the [POWER OFF] button to turn off the power.
5. Loosen the nut.
6. Take off the hose.
7. Clean the
fi
lter.
Water supply hose
fi
lter
• When water supply seems constricted.
• Upper part of the tub
Wipe with a damp cloth.
Do not apply water directly.
The
fl
oor could get wet.
Main unit and tub
•
Main unit
Wipe with a soft cloth. Use a neutral dishwashing liquid or soap for
stubborn places.
Do not apply water directly.
Do not use cleanser, paint benzine, alcohol, kerosene, etc.
Follow any instructions that come with a chemically treated cloth.
1
1
2
1
2
Lint
fi
lter
• When the
fi
lter is full.
1
(Lint
fi
lter A)
Remove the lint
fi
lter A.
2
3
(Lint
fi
lter A)
Put the
fi
lter back in.
Make sure it clicks
into place.
1
(Lint
fi
lter B)
Pull out the lint
fi
lter B
from the lock.
By using
fi
ngers to
press and pull out at
the upper part of the lint
fi
lter’s side.
Remove the lint
from the
fi
lter.
3
(Lint
fi
lter B)
Set it back to the
original position.
• Insert the bottom
fi
rst as shown in the
fi
gure.
• Press down and lock as the arrow.
• When the
fi
lter is torn, etc., obtain another one from the place of purchase.
• Turn the wash tub if the
fi
lter cannot be removed easily.
Maintenance
To prevent from fungus growth at the outer tub area.
“TUB DRY”
Remark: Please be informed do not put laundry inside the tub during this program.
1
Press the [POWER ON] button.
2
Press the [PROGRAM] button six times
for [TUB HYGIENE] Course.
• The [TUB HYGIENE] light will be indicated.
3
Press the [WASH] button and the [RINSE] button once each to select only [SPIN].
4
Press the [START/HOLD] button.
• Spinning operation will be operated for 30 minutes
The buzzer lets you know when the washing is
fi
nished.
1
2
4
3
NA-F90T1 80T1_EN.indd 17
NA-F90T1 80T1_EN.indd 17
9/17/08 9:45:32 AM
9/17/08 9:45:32 AM