ECONAVI lamp
(NA-F135X1 / NA-F115X1)
•
Operation panel
of the NA-F135X1
Power Off/On
Air Dry
Start/Pause
Program selection
Child Lock lamp
Change process
settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes.
Flashing (in progress)
Lighted
●
After starting operation, you
can change settings only during
wash process by pressing
“Start/Pause”.
Preset
Set the time to finish washing (in
hours). ( lights.)
e.g.) 8 hours later
●
Setting range: 2 - 24 hours later,
in one-hour increments. (3 - 24
hours later for the Power wash
+ Soak program)
●
Not available for the following
programs:
Delicate, Fragrance, Blanket,
Tub Hygiene, Air Dry
NOTE
●
In case of a power failure
during operation, operation will
resume from the point where it
was stopped when the power
is recovered (Auto Restart).
●
The power turns off
automatically if you do not
press “Start/Pause” within
10 minutes after power-on.
Change water
amount
During the wash
process, press “Water
Level” to change the
water amount.
●
Some water amounts
cannot be selected
depending on the
program.
●
When the remaining
time is displayed,
press “Water Level”
to check the water
amount.
Water level/water amounts
Level
High
10-8
Mid
7-5
Low
4-2
Extra
Low
1
Model
Detergent*
Water
amount (L)
93 86 81 73 66 58 52 46 38 33
NA-
F135X1
NA-
F135A1
90 86 81 73 66 58 52 46 38 33
NA-
F125A1
86 81 73 66 58 54 52 46 38 33
NA-
F115X1
NA-
F115A1
* : 1 scoop of detergent
●
Each water level, except “Extra Low”, has
three water amount options that can be
switched while the level is lit by pressing
“Water Level”. (Example: For NA-F135X1,
“High” has 93 L, 86 L and 81 L options.)
Water amount/
remaining time
After starting operation, indicates
the water amount according to
the amount of laundry.
After approx. 5 seconds, indicates
the approximate remaining time
(min).
6. OPERATION PANEL
- 9 -
