- 14 -
●Set to initial mode
for tension of belt
●In case to change PCB or
move V-belt. Set the V-belt
tension to initial mode for using
below procedure.
●The initial display will be
indicated “b0”, after that press
“Start/Pause” button once, it
shall be listened click sound six
times to set properly.
4
M
●Indicate the error
message of the last
time
●”Digit lights” shall be indicate
“E” initially, press “Wash” button
to show the last error and press
the wash button again to return
to initial mode.
●If any error message occurred
in the past, “H” or “U” some
number shall be indicated
alternately.
If no error message occurred,
the light indicates “00”.
5
G
●Indicate the
operation times
●”Digit lights” shall be indicate
“C”
initially, press “Wash” button to
change indication Digit of
operation times.
●Press once : Digit “Thousand.
Hundred”.
●Press twice : Digit “Ten.One”.
6
H
