12. TABLE OF ERRORS
12.1 U-Error indication
● If there is an operation error or if there is a problem with the washing machine, such as faulty draining,
spining etc; operation will stop, the warning buzzer will sound, and an error indication will be displayed.
- All the switchs cannot be operated.
- An error indication will be displayed.
- 16 -
Indication
Content
Check Point
Method to clear
U11
Water can not drain ●Check at drain water hose, clogged or not?
●Check at hose tip under water flow.
●Check at drain hose raised higher than 10 cm.
above the floor.
●Check total length longer than 3 m.
(including the extension hose).
●Resume operation by
opening and closing
the lid
●Clear and clean drain
hose
U12
The lid is open
●Did you try to run the washing machine with
the lid open?
●Close the lid
U13
Spin or Air Dry is
not possible
●Are clothes concentrated on one side of tub?
●Is the washing machine installed on an
unstable or inclined surface?
●Distribute the clothes
evenly and close the lid
●Resume operation by
opening and closing
the lid
U14
Water can not be
supplied
●Is the water faucet turned on?
●Water outage?
●Is the water supply filter clogged with dirt?
●Resume operation by
opening and closing
the lid
U99
Water has been
forcibly drained
●Water has been forcibly drained because the
lid was open for 10 seconds or more with Child
lock set.
●Disconnect the power
plug--->plug in (after 5
sec.)
