Washing instructions - 25
Optional Functions
CAUTION
If the case displayed in page 37 occurs
during operation, please switch off the
power, deactivate the child lock and
then re-operate the appliance.
Setting the buzzer
Cancel the buzzer given when a
programme is over.
1. Press the On button to start the
appliance.
2. Press and hold the Mode button for
more than 5 seconds.
A buzzer is given, thus the buzzer given
when the washing is over is cancelled.
To recover the buzzer, switch off the
appliance and repeat the steps 1 and 2.
(two buzzers are given.)
Child lock
- To prevent a child from entering the
drum, the child lock function locks the
door and the buttons.
Activating/deactivating child lock
1. Press the On button.
2. Press and hold the Child lock button
for more than 5 seconds.
When the screen displays CL for two
seconds, and a beep is given, the
setting is completed. (During child lock
setting, even if no washing operation is
conducted, the child lock indicator lamp
lights up constantly.)
3. To deactivate, press and hold the
Child lock button for more than 5
seconds. Two beeps are given, and
the child lock is deactivated.
Example for using the child lock
- Put the laundry into the drum, select
a programme, start operation, and set
the child lock. (The child lock is still in
locked state after the operation is over.)
- Deactivate the child lock, and take out
the laundry.
- When not using the appliance, please
set the child lock. (The locked state is
maintained after the power supply is
switched off.)
- To use the appliance, please deactivate
the child lock and then open the door.
NA-128VG5_New Zealand.indb 25
2015-2-6 20:30:47
