14 - Installation Instructions
Checking after Installation
Installation checklist
3
2
4
5 , 6
1
5 , 6
7
1
Anchor bolts for transport
Have they been removed?
Have the cover caps been installed
correctly?
2
Installation location
Is the appliance installed on a flat and
firm floor surface?
Does it run without vibrating?
3
Water-supply hose
Is it free from leaks?
Is the water supply normal?
4
Water-drain hose
Is it free from leaks?
Does it drain normally
5
Adjustable stands
Are they installed securely?
6
Stand cushions
Are they standing flat?
If the appliance is not level, there may
be abnormal sounds when water is
drained out.
7
Mains lead connection
Is the rated voltage of the independent
socket between 220 V and 240 V?
Test run after installation
Confirm whether there is water leakage
or abnormal noise and whether the water
drainage is normal.
Conduct the following operations without
laundry in the drum.
1. Open the water tap.
2. Close the door.
3. Press the On button, select the Rapid
15 programme, and then press the
Start/Pause button.
Confirm the following:
- Is there abnormal noise?
In case of this, ensure that the appliance
is stable.
- Is there a water leak?
In case of this, ensure that the water
hoses are connected correctly.
The following errors may occur:
- Is the water-drain hose connected
correctly?
Is the water-drain hose clogged?
- Is the water-supply hose connected
correctly and is the water tap opened?
After checking and eliminating the error,
open and then close the door, and re-start
the commissioning.
NA-128VG5_New Zealand.indb 14
2015-2-6 20:30:39