Panasonic MCGG773 - UPRIGHT VACUUM - MULTI LANGUAGE, Operating Instructions Manual

Page: 36 / 48

- 36 - - 13 -
Voltaje
Protector termal
Extensión de cordón Herramientas
120 V c.a. (60 Hz)
Si 15.2 m (50 pi) Si
Power Thermal Protector Cord Length Tools
120V AC (60 Hz)
Yes 15.2 m (50 Ft.) Yes
Alimentation
Protecteur thermique Longueur du cordon
Accessoires
120 V c.a. (60 Hz)
Oui 15.2 m (50 pi) Oui
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Cleaning Exterior and Tools
➢ ➢
Clean exterior using a clean, soft cloth that has been dipped in a solution of mild
liquid detergent and water and wrung dry.
➢ ➢
DO NOT drip water on vacuum cleaner
➢ ➢
Wipe dry after cleaning.
➢ ➢
DO NOT clean tools in dishwasher or clothes washer.
➢ ➢
Wash tools in warm soapy water, rinse and air dry.
➢ ➢
DO NOT use tools if they are wet.
Cleaning Agitator
➢ ➢
Clean agitator after every five uses
and every time the belt is replaced
.
➢ ➢
Remove lower plate . See: “Removing
and Installing Lower Plate”
➢ ➢
Cut off any hair, thread, string, carpet
pile, and lint entangled around
agitator with a pair of scissors
.
➢ ➢
Remove agitator. See: “Replacing
Belt”
➢ ➢
Remove any string or debris located
on the end caps, washers or agitator
shaft
.
➢ ➢
Reinstall agitator and lower plate .
See: “Removing and Installing Lower
Plate”