Panasonic MC-V9658, Operating Instructions Manual

Page: 44 / 56

- 13 - - 44 -
Overload Tools-
POWER Protector Headlight On-Board Cord Length Cord Reel
120V. AC (60Hz)
Yes Yes Yes 28 Ft. (8.5 m) Yes
12.0 A
Protector Almacen-
contra
Extensión amiento
Voltaje subrecargas Luz Herramientas
de cordón del cordón
120V. AC (60Hz)
Si Si Si 8,5 m (28 pi) Si
12,0 A
Protecteur Dispositif Longueur Rappel
Alimentation de surcharge
d’éclairage Accessoires
du cordon du cordon
120 V c.a. (60 Hz)
Oui Oui Oui 8,5 m (28 pi) Oui
12,0 A
FEATURE CHART
D Diia ag grra am ma a d de e c ca arra ac ctte erríís sttiic ca as s
Tableau des caractéristiques
TO CHECK BRUSHES:
➢ ➢
When brushes are worn to the level
of the base support bar, replace the
brush dowel.
TO REPLACE BRUSH DOWEL
➢ ➢
Remove POWER NOZZLE cover,
belt and agitator assembly. (See
“REMOVING BELT”).
➢ ➢
Remove agitator supports,
washers, screws, end brush, brush
sprocket, and brush sprocket
flange from ends of agitator
assembly.
➢ ➢
Replace brush dowel.
➢ ➢
Reassemble agitator assembly.
➢ ➢
To line up screw holes in dowel,
sprocket and end brush, be sure the
brush portion of end brush lines up
with brushes on brush dowel.
➢ ➢
Replace belt, agitator assembly and
POWER NOZZLE cover screws.
(See “REPLACING BELT”).
Base Support Bars
Barres de support de la base
Barra de soporte de la base
Brush Servicing
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the unit. Failure to do
so could result in electrical shock or per-
sonal injury from cleaner suddenly start-
ing.