Panasonic Lumix DMC-GF2 Operating Instructions Manual Download

Page: 160 / 218

Playback/Editing

- 160 -

You can do the following if a mark has been added to pictures and they have been set as
favourites.

• Play back the pictures set as favourites only as a slide show.

• Play back only the pictures set as favourites. ([FAVORITE PLAY])

• Delete all the pictures not set as favourites. ([ALL DELETE EXCEPT

])

Select [FAVORITE] on the [PLAYBACK] Mode menu.

(P56)

Press

to select [ON] and then press [MENU/SET].

• You cannot set pictures as favourites if [FAVORITE] is set to [OFF]. Also [

] will not

appear when [FAVORITE] is set to [OFF] even if it was previously set to [ON].

• When [CANCEL] is selected, see “Cancelling all the [FAVORITE] settings”.

∫

Cancelling all the [FAVORITE] settings

Select [CANCEL] on the screen shown in step

and then press [MENU/SET].

Press

to select [YES] and then press [MENU/SET].

• You cannot select [CANCEL] if not even one picture has been set as a favourite.

• [CANCEL] cannot be selected when in [PLAYBACK MODE].

Note

• You can set up to 999 pictures as favourites.

• When printing pictures at a photo printing store, [ALL DELETE EXCEPT

]

(P54)

is useful so

only the pictures you want to be printed remain on the card.

• You may not be able to set pictures taken with other equipment as favourites.

• The pictures that were taken with the [QUALITY] set to [

] cannot be set to [FAVORITE].

[FAVORITE]

Press [

] to close the menu.

Press

to select the picture and then touch [

]

to set

it during playback.

• [

] is displayed on pictures that are already registered as

favourites.

• Repeat the above procedure.
• If [

] is touched again, the favourite setting is cancelled.

• You can also set/cancel favourites by pressing

Summary of Contents for Lumix DMC-GF2



























































































































































































































Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands

Panasonic Lumix DMC-GF2, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands