Panasonic Lumix DMC-GF2 Operating Instructions Manual Download

Page: 54 / 218

Basic

- 54 -

∫

When [DELETE ALL] has been selected with the [FAVORITE]

(P160)

setting

The selection screen is displayed again. Select [DELETE ALL] or
[ALL DELETE EXCEPT

], select [YES] and delete the pictures.

Note

• Do not turn the camera off while deleting (while [

‚

] is displayed). Use a battery with sufficient

battery power or the AC adaptor (optional).

• If you touch [CANCEL] while deleting pictures using [DELETE MULTI], [DELETE ALL] or

[ALL DELETE EXCEPT

], the deleting will stop halfway.

• Depending on the number of pictures to be deleted, it may take some time to delete them.

• If pictures do not conform to the DCF standard or are protected

(P163)

, they will not be deleted

even if [DELETE ALL] or [ALL DELETE EXCEPT

] is selected.

To delete multiple pictures (up to 100) or all the pictures

Touch [

Touch [DELETE MULTI] or [DELETE ALL].

• [DELETE ALL]

step

Select the picture to be deleted.

(repeat this step)

• [ ] appears on the selected pictures. Touching again

cancels the setting.

• The screen can be switched by dragging the slide bar

up or down

(P9)

Touch [OK].

Touch [YES].

Summary of Contents for Lumix DMC-GF2



























































































































































































































Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands

Panasonic Lumix DMC-GF2, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands