- 163 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
1
Select [PROTECT] on the [PLAYBACK] Mode menu.
∫
Cancelling all the [PROTECT] settings
1
Select [CANCEL] on the screen shown in step
2
and then press [MENU/SET].
2
Press
3
to select [YES] and then press [MENU/SET].
• If you press [MENU/SET] while cancelling protection, the cancelling will stop halfway.
Note
• The protect setting may not be effective on other equipment.
• Even if you protect pictures on a card, they will be deleted if the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
[PROTECT]
2
Press
3
/
4
to select [SINGLE] or [MULTI] and then press [MENU/SET].
• When [CANCEL] is selected, see “Cancelling all the [PROTECT] settings”.
3
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
• Repeat these steps for each picture.
• The settings are cancelled when
[MENU/SET] is pressed again.
• Press [
] to return to the menu
screen.
[SINGLE]
[MULTI]
Press
2
/
1
to select
the picture.
Press
3
/
4
/
2
/
1
to
select the pictures.
