Panasonic Lumix DMC-GF2 Operating Instructions Manual Download

Page: 62 / 218

Basic

- 62 -

• Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].

• [SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode.

• [SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].

• Press any button to turn on the LCD monitor again.

• [SLEEP MODE] does not work in the following cases.

– When using the AC adaptor

– When connecting to a PC or a printer

– When recording or playing back motion pictures

– During a slide show

• If it is set to [HOLD] when the camera is set to [

]

(P34)

or [

]

(P83)

, switching of the

playback screen display

(P39)

or enlargement by rotating the rear dial is possible during Auto

Review.

• Regardless of the Auto Review setting, pictures will automatically be reviewed when taking

burst pictures with [H] set

(P79)

, and recording with Auto Bracket

(P81)

. (Will not hold) Also,

you cannot set the Auto Review function.

• If [HIGHLIGHT]

(P142)

is set to [ON], white saturated areas appear blinking in black and white

when the Auto Review function is activated.

• [AUTO REVIEW] is disabled when Burst Mode is set to [M] or [L].

• When [AUTO REGISTRATION] in [FACE RECOG.]

(P119)

is set to [ON], [AUTO REVIEW] can

only be set to [3SEC.] or [5SEC.].

[ECONOMY]

You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.

[SLEEP MODE]:

The camera is automatically turned off if the camera has not been
used for the time selected on the setting.

[OFF]/[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]

[AUTO LCD OFF]:

The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.

[OFF]/[15SEC.]/[30SEC.]

[AUTO REVIEW]

Set the length of time that the picture is displayed after taking it.

[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:

The pictures are displayed until shutter button is pressed halfway.

Summary of Contents for Lumix DMC-GF2



























































































































































































































Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands

Panasonic Lumix DMC-GF2, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF2

Reviews:

Related manuals for Lumix DMC-GF2

Brands by name

Popular brands