Panasonic Lumix DMC-FZ150 Basic Owner'S Manual Download Page 194

Page: 194 / 440

Playback/Editing

- 150 -

You can do the following if a mark has been added to pictures and they have been set as
favorites.

–

Play back only the pictures set as favorites. ([FAVORITE PLAY])

–

Play back the pictures set as favorites only as a slide show.

–

Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT

])

Select [FAVORITE] on the [PLAYBACK] Mode menu.

(P48)

Press

to select [SINGLE] or [MULTI] and then press [MENU/

SET].

∫

Canceling all the [FAVORITE] settings

Select [FAVORITE] on the [PLAYBACK] Mode menu.

Press

to select [CANCEL] and then press [MENU/SET].

•

Confirmation screen is displayed. It is executed when [YES] is selected.

Exit the menu after it is executed.

Note

•

You can set up to 999 pictures as favorites.

•

You may not be able to set pictures taken with other equipment as favorites.

•

The pictures that were taken with the [QUALITY] set to [

] cannot be set to [FAVORITE].

[FAVORITE]

Select the picture, and then

press [MENU/SET].

•

[

] is displayed on pictures that are

already registered as favorites.

[MULTI] setting

•

Repeat these steps for each picture.

•

The settings are canceled when

[MENU/SET] is pressed again.

•

Exit the menu after it is set.

[SINGLE]

[MULTI]

Press

to select

the picture.

Press

select the pictures.

Summary of Contents for Lumix DMC-FZ150

























































































































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-FZ150

Reviews:

Related manuals for Lumix DMC-FZ150

Brands by name

Popular brands

Panasonic Lumix DMC-FZ150, Basic Owner'S Manual

Search results

Summary of Contents for Lumix DMC-FZ150

Reviews:

Related manuals for Lumix DMC-FZ150

Brands by name

Popular brands