Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 26

Page: 26 / 309

2. Getting Started/Basic Operations

Inserting and removing the card (optional)

• Check that the camera on/off switch is set to [OFF].

Slide the release lever

to the [OPEN]

position and open the card/battery door.

Insert the card

all the way in until you

hear a clicking sound.

• Check the orientation of the card.
• Do not touch the card terminals

Close the card/battery door and slide the
release lever to the [LOCK] position.

∫

To remove

Insert until a clicking sound is heard and then pull it
straight out.

• Turn the camera off and wait for the “LUMIX” display on the monitor to clear before removing

the card. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)





Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 26 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: