Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 180

Page: 180 / 309

10. Using Menu Functions

180

Applicable modes:

The camera raises the resolution by correcting the blurriness caused by diffraction when
the aperture is closed.

Settings: [AUTO]/[OFF]

Applicable modes:

Disables operational sounds and output of light at once.

Settings: [ON]/[OFF]

• Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled.

The following settings are fixed.
– [Flash Mode]: [

] ([Forced Flash Off])

– [Shutter Type]: [ESHTR]
– [AF Assist Lamp]: [OFF]
– [Beep Volume]: [

] (OFF)

– [Shutter Vol.]: [

] (OFF)

[Diffraction Compensation]

[Rec]/

[Motion Picture]

[Diffraction Compensation]

• Noise may stand out with higher ISO sensitivity.

[Silent Mode]

[Rec]

[Silent Mode]

• Even when [ON] is set, the following functions light up/flash.

– WIRELESS connection lamp
– Self-timer indicator

• The operation sounds of this camera such as the lens aperture sound are not muted.

• Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject

when you use this function. Use at your own risk.

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 180 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: