Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 23

Page: 23 / 309

2. Getting Started/Basic Operations

• Do not leave any metal items (such as clips) near the contact areas of the power plug.

Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.

• Do not use any other USB connection cables except the supplied one.

This may cause malfunction.

• Do not use any other AC adaptors except the supplied one.

This may cause malfunction.

• Do not use a USB extension cable.
• Do not use the AC adaptor (supplied) and the USB connection cable (supplied) for other

devices. Doing so may cause malfunction.

• Remove the battery after use. (The battery will be exhausted if left for a long period of time

after being charged.)

• The battery becomes warm after using it and during and after charging. The camera

also becomes warm during use. This is not a malfunction.

• The battery can be recharged even when it still has some charge left, but it is not

recommended that the battery charge be frequently topped up while the battery is fully
charged. (Since characteristic swelling may occur.)

• If a problem occurs in the power outlet, such as a power outage, charging may not be

completed normally. If this happens, disconnect the USB connection cable (supplied) and
connect it again.

• The AC adaptor is in the standby condition when the mains plug is connected. The primary

circuit is always “live” as long as the mains plug is connected to an electrical outlet.

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 23 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: