Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 209

Page: 209 / 309

209

10. Using Menu Functions

The following network settings are reset to the default:

– [Wi-Fi Setup] (Excluding [LUMIX CLUB])
– Registered device information in [Bluetooth] and values in [Wi-Fi network settings]

You can try Post Focus operations, such as focusing and Peaking, with the image picture.

[Reset Network Settings]

• When requesting a repair or transferring/disposing of the camera, refer to “About the personal

information” on

P305

[Level Gauge Adjust.]

[Adjust.]

Hold the camera in a horizontal position, and press [MENU/SET]. The
level gauge will be adjusted.

[Level Gauge

Value Reset]

Restores the default level gauge setting.

[Demo Mode]

[My Menu] menu

[My Menu Setting]

[My Menu]

[My Menu Setting]

[Add]

Specifies the menu to be displayed in My Menu to register it.

[Sorting]

Rearranges the menus displayed in My Menu. Select the menu you want to
move and set the destination.

[Delete]

Deletes registered menus.

[Delete Item]:

Deletes selected menus.

[Delete All]:

Deletes all of the menus.

[Display from

My Menu]

Sets the first menu to be displayed when the menu screen is displayed.

[ON]:

Displays My Menu.

[OFF]:

Displays the last-used menu.

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 209 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: