9-5. CUSTOM Mode Display Function
Press the
MODE key 5 times.
Turn the Jog switch 5 times
toward the ‘
Ⳮ
’ direction.
Turn the Jog switch 3 times
toward the ‘
Ⳮ
’ direction.
Press the
Jog switch.
Press the
Jog switch.
Code setting
Data bank
load
Emission halt
M.G.S.
Response time
change
Press the
Jog switch.
Press the
MODE key once.
Press the
MODE key once.
Select function
by turning the Jog switch.
This selects one function that you would like to display in the navigation display in CUSTOM mode.
1
Press the [MODE key] 5 times to select ‘PRO mode’.
3
Press the [Jog switch] to enter the ‘code setting’ state.
7
If the [Jog switch] is pressed, the setting will be confirmed.
2
Turn the [Jog switch] 5 times toward the ‘
Ⳮ
’ direction, to
select ‘PRO5 mode’.
4
Turn the [Jog switch] 3 times toward the ‘
Ⳮ
’ direction, to
enter the ‘CUSTOM mode display selection’ state.
8
If the [MODE key] is pressed once, the amplifier will return to
‘PRO5 mode’.
9
Press the [MODE key] once, the amplifier will return to ‘RUN
mode’ (normal sensing operation).
5
If the [Jog switch] is pressed, the current CUSTOM mode
setting (red) will be displayed.
* The factory setting is ‘Response time change’.
6
If the [Jog switch] is turned, the CUSTOM mode (red) will
blink on the digital display.
Select the desired function to display in CUSTOM mode.
51
Ramco National
(800) 280-6933
www.panasonicsensors.com
