Cancel: If the [MODE key] is pressed, the amplifier will return to the previous settings status, immediately before
the [Jog switch] was pressed (the selected setting has been confirmed).
Functional Description
1-1. Functional Description
1-2. Setting Procedure
1
The use [MODE key] and [Jog switch] are utilized to configure various settings.
Press the [MODE key]
(mode selection / cancellation)
1
Turn the [Jog switch] in the ‘
’ or
‘
’ direction (chooses setting for selection)
2
Press the [Jog switch]
(confirms the selected setting)
3
1
Output 1 operation
indicator (Orange)
3
Laser emission
indicator (Green)
2
Select 1 indicator
(Yellow)
1
Output 2 operation
indicator (Orange)
2
Select 2 indicator
(Yellow)
Digital display (Green, Red)
4
MODE indicators
6
MODE key
5
Jog switch
, and are in the correct order for selecting settings.
1
Output 1, 2 operation indicator (Orange)……
2
Select 1, 2 indicator (Yellow)……………
3
Laser emission indicator (Green)………
4
MODE indicators…………………………
5
Jog switch…………………………………
6
MODE key…………………………………
: Lights up during normal sensing operation.
: When this indicator lights up, in normal mode, the ‘threshold
value’ can be set by utilizing either ‘2-level teaching’, ‘limit
teaching’ or ‘full-auto teaching’. In window comparator mode
and hysteresis mode, the ‘threshold value’ can be set by either
‘1-level teaching’, ‘2-level teaching’ or ‘3-level teaching’
whenever this indicator lights up. Span adjustment can be carried
out when using rising differential and trailing differential modes.
: When this indicator lights up, the output operation setting can be done.
: When this indicator lights up, timer operation and timer period
setting can be done.
: When this indicator lights up, function is stored in the CUSTOM
mode, can be set.
: When this indicator lights up, further advanced functions, such
as the copying and memory functions, can be set.
Lights up when output 1 or output 2 is ON.
Lights up when output 1 or output 2 is selected.
Lights up when laser is emitted.
RUN (Green)
TEACH (Yellow)
L/D ON (Yellow)
TIMER (Yellow)
CUST (Yellow)
PRO (Yellow)
Moving this switch in the ‘
’ or ‘
’ direction, allows different items to be viewed
for selection and pressing the switch then confirms the selected setting.
This key is used to select operating modes and to cancel settings while they are
being configured.
Selection and confirmation of settings are performed according to the order of the numbers, as shown on the amplifier: 1 , 2 and 3 .
1
Ramco National (800) 280-6933 www.pansonicsensors.com
