background image

– 5 –

For your safety 

(when using the LQ-MD800E in Europe)

FOR U.K. ONLY

This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 13 amps and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark 

or the BSI mark 

on the

body of the fuse.

If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.  THERE IS A
DANGER OF SEVERE ELECTRICAL SHOCK IF THE
CUT OFF PLUG IS INSERTED INTO ANY 13 AMP
SOCKET.

If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

IMPORTANT:

The wires in this mains lead are coloured

in accordance with the following code:

Green-and-Yellow:

Earth

Blue:

Neutral

Brown:

Live

As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
• The wire which is coloured GREEN-AND-YELLOW

must be connected to the terminal in the plug which is
marked with the letter E or by the Earth symbol

or

coloured GREEN or GREEN-AND-YELLOW.

• The wire which is coloured BLUE must be connected

to the terminal in the plug which is marked with the
letter N or coloured BLACK.

• The wire which is coloured BROWN must be

connected to the terminal in the plug which is marked
with the letter L or coloured RED.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This product is equipped with 2 types of AC mains cable.  One is for continental Europe, etc. and the other one is only
for U.K.
Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable.

FOR CONTINENTAL EUROPE, ETC.

Not to be used in the U.K.

FOR U.K. ONLY

If the plug supplied is not suitable for your socket
outlet, it should be cut off and appropriate one fitted.

Caution for AC Mains Lead

How to replace the fuse

1. Open the fuse compartment with a screwdriver.

2. Replace the fuse.

Fuse

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Downloaded From Disc-Player.com Panasonic Manuals

Summary of Contents for LQ-MD800P













































Reviews: