Message
Cause and Solution
Received remote control ID
(
n1
). VC500 current setting is
(
n2
).
Press [Home] button using
the correct remote control, or
setup remote control as
follows.
1. Press [.] and [#] at the same
time
2. Within 2 seconds, press
[
n2
]
3. Press [Home] to finish, this
message will disappear.
If this message will not
disappear, please check the
batteries in your remote
control and try again.
Note
•
The remote control ID
of the remote control
(
1
/
2
/
3
) is represented
by
n1
.
•
The remote control ID
of the KX-VC500 (
1
/
2
/
3
) is represented by
n2
.
•
The remote control IDs of the KX-VC500 and remote control do not
match.
→
Follow the on-screen instructions to change the remote control ID of the
remote control to match that of the KX-VC500.
→
If you cannot change the remote control ID of the remote control,
contact your dealer.
→
If multiple remote controls with assigned IDs will be used close together
or if you do not want this message to be displayed, select
"OFF"
for
"Check ID mismatch"
. (Page 68)
The IP Address is invalid.
Please enter a valid IP
Address.
•
The IP address contains an invalid value.
→
Enter the IP address correctly. The correct format is
XXX.XXX.XXX.XXX (dotted format decimal notation).
If the IP address contains 1 or 2 digit numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Multicast or broadcast addresses cannot be used.
Check the IP Address.
•
The IP address of the other party is the same as your own IP address.
•
The same IP address is used for several parties in a multiple-party video
conference call.
→
Register the correct IP address.
→
Check the IP address registered in the contact list.
User Manual
97
Additional Information
Summary of Contents for KX-VC500
Page 101: ...User Manual 101 Notes ...
